Closely related paper backing, poly-coated paper specifically designed for use by consumers in the painting, refinishing the car. Use of this product ensures the highest quality results by protecting the automobile industry from paint penetration, seep and overspray.
Newspaper, which previously was often used for painting cars proved too porous bleed through for this purpose and often resulted in color. Poly liner coating provides comprehensive protection for the surfaces used, if properly used.
Masking products provide the highest level of resistance against harsh attacks from solvents in auto manufacturing, sealers, varnish, enamel paint and varnish used. Prevent the entry of dirt from fibers and performs well even in wet grinding. Masking products easily resist the onslaught of powerful fans to dry the car and painting are used.
Liner should not be applied with caution to all, painted surfaces and secured in place by adhesive tape designed for this purpose. This product is available in a wide variety of sizes to fit the entire job. Narrow band ideal for use in the corner. More broadly version best suited for large areas fast driving. Various tools, such as editing, for example, masking paper dispenser, accelerate and simplify the application. Masking dispensers are available as handheld devices or sophisticated multi-roll dispensers.
Protected areas should be used completely dry and free from silicon, grease, dust, rust and dirt from the surface of paper and masking tape. Curved surface, where the tape should be stretched. Easy it is to protect the surface, and then use the paper tape. It should not overlap to hold the area to be painted surface. Then, with a sharp knife to cut a strip along the route, which should be allocated two areas, then remove the tape over the area you painted.
If the device is covered by release paper is required. Choose a wide enough band to completely cover the trim components. In recognition, the handling, for example, using a wide piece of ribbon to the handle first, smoothing the tape by hand to avoid the waves or edges. Then the second piece of tape to cover the bottom of the handle, slightly overlapping the first piece. Apply masking tape to chrome strips, grills, sealing, decorative signs and antennas, in the same way.
When masking bumpers, 12-inch, is effective for the job. Privacy grill easy when masking paper also includes engine compartment to avoid spraying and cooling the engine. Letters and characters can be a problem, which easily solved with a narrow width (1 / 4 ") on tape, but if that were possible, it is best to remove the icon. Headlamps and tail lamps are also easy to use disguised three to six - inch sections.
Two layers of glass are advised to close. Began masking the windshield with the first run to cut a long ribbon around the windshield or glass. Attach masking paper at the bottom of the windshield, and then use the best cuts on the windshield that overlap the bottom. Masking thus prevented that from water and dirt into the paper ran an outdoor area. This is not dry, remove the new paint is applied.
When the cover plate for the two dilute paint, select the paper slightly larger than the area to be covered. Apply masking tape to one end of the paper and attached to the edge of the body. Then collect the required broadband and place
skip to main |
skip to sidebar
dealing with mechanical problems and how to overcome them. various issues relating to the engine, modification, and tune up your vehicle
